Welcome to my blog and thanks for visiting!

Friday, December 16, 2011

Spoiled Layout

Today I am sharing a layout of my beautiful daughter and my Shar-Pei mix Moto (Moto Cross, yes! DH was into Motocross ridding!) over at Princess Penelope's Blog! (The Queen's Puppy).  Moto was born on my birthday! and for that he is super special to me in addition to many more reasons...
The dog was cut three times, one blackout on a darker brown and the shadow and regular cut on lighter brown cardstock using the Animal Kingdom cart.  The letters were cut using Base Camp cart and welding the paw print on the Gypsy from Mickey and Friends cart!
The layout design was inspired by a one page layout shared over at the Echo Park's blog back in November.
The journal/library card is a die and stamp from PTI and the bracket is a Tim Holtz/Sizzix die.
All PP and brads are from the Queen & Co. Perfect Pets collection that you can find over at
Happy N Scrappin'  -- The paw punch is an EK punch.

Thanks for visiting and leaving a comment!

I additionally would like to share that I was just given the go ahead and share that I will be designing for
Twine.ology by Timeless Twine!!  Can't wait to start figuring out creative ways to use their gorgeous twine!

Thursday, December 15, 2011

Honeycomb Ornament

Today I am sharing a tutorial over at She'sASassyLady and here is how I made a Honeycomb Ornament using my Cricut E2 and the Paper Trimmings cartridge (but you can use any cartridge that has a similar ornament).
There are several tutorials on how to make a honeycomb out of paper in the WWW.  Actually I knew the basics of making a honeycomb such as pretending there is a clock face and you place glue at 3, 6, 9 and 12 when creating a honeycomb circle (or similar such as a pumpkin, apple, etc.). Next layer you place glue at 1:30, 4:30, 7:30 and 10:30. Following layer, you go back to 3, 6. 9 and 12....alternating until you are done. You usually use/cut 18 pieces when creating a ball or half of that (8-9) when you want to create a honeycomb design inside a card that does not have to go all the way around.  And the most common paper to use is tissue paper.  But for my project today I was inspired by Becca Feeken over at Splitcoaststampers.  Becca created a honeycomb ornament using a Spellbinders die and I, my Cricut E2!

Step One - Cut 18 of the same design. Since the paper was thin, I selected the thin paper option, but it suggested I set my blade to 5.  I chose to set my blade at 4 and it worked perfectly!
Step Two -
Fold the 18 pieces in half.

I used the thinnest paper I had.
I could not find text paper or
thinner paper at my local
craft store and was a bit hesitant to
cut text/book paper on my E2.
The thinner the
paper, the better results
you will get.

Step Three - Use one of the negative spaces to mark ones and twos, alternating the numbers.  This will be your template so that you don't forget/get lost placing the adhesive.  How did I decide where each number was placed?  This is almost identical to Becca's but she did  not explain the logic.  Mine is that at each curb I had to have one of each, so I started with my biggest curb on the design and marked a one.... from there I just alternated the one and two.
Closer look at the numbers.

Step Four -  Adhere strong adhesive at each point (you can start with the ones or the twos, I started with the ones such as Becca).
The picture is kind of dark but it was the best way to show the dubs of adhesive.

Step Five - Add adhesive to the number twos.... alternating on all 18 pieces....
Step Six - After you have your "sandwich" or all adhered together, you will have two green sides like mine (or the color of your paper).  At this point if you are going to add a piece of trim, ribbon or? in the middle of your ornament, you need this step, otherwise you can skip.

I run out of 1/2" tacky tape...
on my way to craft store...

I added tacky tape to the middle
and run a piece of ribbon so that
I could hang the ornament.

I additionally wanted a place to
hang my embellishment at the 
I simply tied a piece of gold ribbon, 
adhered it to the middle with tacky tape
letting a tiny bit at the bottom and enough 
to hang on top.

Step Seven - Time to bring it all together.  I added adhesive to one of my green sides and carefully brought it together by unfolding it.  (I decided to ink the edges with distress ink before bringing it all together - the white was too white.... next time I will make sure I find prettier double sided paper).
You can see the ribbon sticking out at the top.

Last step is to embellished as desired.
I almost cut the upper part of the design because I did not think I needed it, but am glad I left it alone. I like how that extra top part looks in the ornament.

I just added a bow and some sugared berries.

I am entering my ornament over at the Cricut Circle Blog - Weekly Challenge #47 -
Ornament challenge with a glitter twist
My ribbon is glittery and my sugar berries have a glittery look

Thanks for visiting and leaving a comment!

Tuesday, December 13, 2011

Trimming the tree 2 page layout

Today I am sharing a two page layout over at
Happy N Scrappin' using Fancy Pants St. Nick Layout Kit

With this kit, you get everything you need to create two 1 page layouts and one 2 page layout.
This is the 2 page layout-

You can see one of the 1 page layouts on my previous post.

Hope you can come back and visit on Thursday, I will be sharing a tutorial over at She's A Sassy Lady and here on my blog.

Thanks for stopping by and leaving a comment!